Search     
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Timer < 365M Series
Downloadable Files:
PDF icon 365M Series
365M Long-Ranger Computing Timer with Memory
  • EEPROM Memory
  • Magnetic Latching Relay
  • Delayed & Instantaneous DPDT Contacts
  • Switch Selectable Sec., Min. or Hrs. Ranges
  • Nine Ranges 0 to 9.99, 99.9 or 999
  • High Accuracy & Noise Immunity
  • Easy Plug-In Housing
  • High Intensity Blue Fluorescent Display
  • Fully Gasketed and O-ring sealed to be dust and water-tight
  • Timeup or Timedown Display Operation
  • 50 or 60 Hz Operation Self-Adjusting
Product Detail:
Packaged in a 72mm2 DIN housing, the ATC 365M is a true plug-in timer that can be replaced in seconds without disturbing the mounting housing or field wiring. Machine and process downtime is kept to a minimum. The 365M is also fully gasketed and O-ring sealed to be dust tight.
WIDE RANGE: Each 365M timer covers the overall span of 0.01 Sec. to 999 Hrs., in nine switch-selectable ranges of 9.99, 99.9, or 999 Sec, Min, or Hrs.
EASY-TO-ADJUST PRESET: ATC’s unique three rotary switches for easy setting and adjustment of the preset time is an industry standard. The switches can be adjusted anytime, even during a timing cycle. The timer is constantly scanning the preset setting and instantly
re-computes the time cycle if a preset change is detected. This is especially valuable in the Timedown mode allowing you to shorten or abort the current time cycle without the removal of power.
SELF-CALIBRATING: The microprocessor automatically calibrates the timer for 50 or 60Hz power operation, there are no switches or jumpers to set.
PROGRAMMABLE DISPLAY: An internal DIP switch can be set for Timeup or Timedown and Stop display operation on the Arrangement 30 model. The Arrangement 50 model can be set for Timeup or Timedown and go. There is a horizontal timing bar “—” which appears to the right of the display and blinks once per second during timing and rapidly at time-out. At left, a timed-out symbol “∇” blinks after time-out indicating when the magnetic delayed relay is latched.
MAGNETIC LATCH RELAY: The 365M utilizes a unique magnetic latch delayed relay which energizes, latches, at time-out. Once latched it will not unlatch even with power removed or the unit is unplugged from the housing. It will only unlatch when power is momentarily applied to the Reset, terminal 16.
NON-VOLATILE MEMORY: An EEPROM memory chip to retain the time value during a loss of power and continues timing when power is restored. No battery is required.
Part Numbers:
Create Model Number >>>>>
365M
xx
xx
xx
P
 xx
Range
300
Q
30
P
X
0 to 9.99, or 99.9 or 999 sec., min., or hr
Special
000
Voltage & Frequency
120 VAC, 50-60 Hz
240 VAC, 50-60 Hz
R
24 VAC, 50-60 Hz
T
Special
K
Arrangement
Selectable Timeup & Stop or Timedown & Stop with Display, Standard
Selectable Timeup & Stop or Timedown & Stop with Display,
Non-Standard
35
Selectable Timeup & Go or Timedown & Go with Display, Standard
50
Selectable Timeup & Go with Display, Non-Standard
55
Features
Basic plug-in unit
Standard Unit
Special
K
Options:
Purchase Details:
Product Contact:
Sales Contact
Technical Contact
Specifications:
Models Choice of two standard 120 VAC, models Each model available in 240 VAC or 24 Vac
365M300Q30PX Timeup & Stop or Timedown & Stop with Display
365M300Q50PX Timeup & Go or Timedown & Go with Display
Ranges Nine (9) Switch-selectable ranges of 0-9.99, 0-99.9 and 0-999 sec., min. or hrs.
Memory Retention 100,000 read/write cycles
Reset Time Guaranteed not to reset <20 mSec
Typical Reset = 40 ms
Guaranteed to always reset >60 mSec
Display Cycle Progress 3-digit high-intensity blue VF display, 0.3 inch Timing Bar: "—" display; blinks once per second during timing, rapidly after time-out.
TIME-OUT symbol: “∇”, blinks after time-out, blinks when latch relay is latched.
Clock Input (terminal 15) 120 VAC Model 95-132 VAC, 10mA max. current at
240 VAC Model 190-264 VAC, 10 mA max. current at 240V
24 VAC Model 19.2-26.4VAC,  20 mA max. current at 24V
Temperature Rating 32 to 140°F (0 to 60°C)
Power Requirements 120 VAC 95-132 VAC, 50 or 60 Hz.
 Inrush — .3A.
 Running   0.06A at 120 VAC
240 VAC 90-264 VAC, 50 or 60 Hz.
Inrush — .15A.
Running — 0.03A at 240 VAC
24 VAC 19.2-26.4 VAC, 50 or 60 Hz
 Inrush — 1A.
 Running — 0.25A at 24 VAC
Load Relays Type DPDT, Form C.
Operating Release Time 10 mSec, max.
Contact Ratings 7A at 120, 240 or 24 VAC 1/6 HP
Life 100 million operations (no load)
Terminals 16 screw (6-32) terminals with saddle clamps accessible at rear
Housing 72mm2 DIN size; plug-in design; fully gasketed, dust and water-tight in panel mounted installations. Panel mounting bracket included.
Weight NET: AC 1 lb., 6 oz., DC 14 oz. Shipping:  AC 2 lbs. DC 1 lb., 8 oz.