Search     
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Timer < FX4S Series
Downloadable Files:
PDF icon FX4S Series
FX4S Series Preset Counter/Timer
  • 4 Digit LED Display
  • Count Up, Down, or Up/Down Selectable
  • Universal 100-240VAC Power Supply
  • Relay and Solid-State Output
  • Selectable as Counter or Timer Control
  • Lithium Battery Memory—10 Years
Product Detail:
The FX4S is a single level preset counter or timer control with two (2) outputs, a 3A at 240VAC relay and a 100mA max. at 30VDC max. NPN open collector transistor. A series of ten (10) DIP switches located on the side of the unit are used to select the output mode required, memory retention on power down, count speed, timer or counter selection, Up/Down mode, input counter mode and timer time base. The front panel features pushbutton switches for preset and an LED display showing time or count.
The FX4S is housed in a compact 1/16 DIN enclosure that requires only 48mm2 front panel space and less than four (4) inches behind the panel. The FX4S is a cost effective, accurate, simple to set, reliable control.
Part Numbers:
FX4S A single model number is required for ordering.
Options:
Consult Factory.
Purchase Details:
Product Contact:
Sales Contact
Technical Contact
Specifications:
Number of Digits Four
Number of Control Presets One
Operating Power 100 to 240VAC, 50/60 Hz.
Power Consumption 4VA
Outputs 1 SPDT Form C Relay; 3A @ 250VAC
1 solid-state NPN Open Collector, Transistor Max. 30VDC; Max. 100mA
Output Modes Latch Output Until Reset—Time/Count
Value Continues Until Reset
Latch Output & Time/Count Value Until Reset
Auto Reset at Start of One Shot Output
Auto Reset at Completion of One Shot Output
One Shot Output—Time/Count Value Continues Until Reset
One Shot Output—Auto Reset of Time/Count Value at Start of One Shot—Auto
Reset of Display at Completion of One Shot
One Shot Output—Auto Reset at Completion of One shot— Time/Count Value
Continues Until Auto Reset
Counter Mode Only—Output is ON Only When Actual Count Value Exceed "SET" Value
Time Mode Only—Symmetrical Repeat Cycle Timer Beginning With "OFF Time"
Count/Reset Inputs Isolated Contact
Transistor (NPN or PNP Selectable)
Memory Lithium Battery
Preset Method Pushbutton Switches—Front Panel
Reset Front Panel Button or Remote Switch Closure
One Shot Time 0.07 to 3 Sec. Adjustable
Power for Sensor 12 VDC ±10%, 50mA
Termination Rear Mounted Screw Terminals
Front Panel Display Count/Time Value Red LED
Mounting Front Panel (Mtg. Clip Supplied)

When Used as a Timer
Time Ranges 0—99.99 Sec. 0—999.9 Sec.
0—9999 Sec. 0—99 Min., 59 Sec.
0—999.9 Min. 0—99 Hr., 59 Min.
0—999.9 Hour 0—9999 Hours
Timing Modes Time UP or Time DOWN


When Used as a Counter
Count Speed Selectable — 30 cps or 2000 cps
Count Modes Count Up, Count Down, or Count Up/Down
Operating Temperature 14° to 131°F (10 to +55°C)
Weight .40 lb.